 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MCC Features l l l l l omponents 21201 Itasca Street Chatsworth !"# $ % !"# SL03 THRU SL24 Transient Voltage Suppressor 300 Watt SOT-23 A D SOT-23 Package For surface mount application Protects 3.0/3.3 up through 24V Components Protects 1 Unidirectional line Provides electrically isolated protection Tape & Reel EIA Standard 481. Mechanical Data l l l l Molded: SOT-23 Surface Mount Body marked with device number. Mounting Position: Any Weight: 0.14 grams (approx.) F C B MAXIMUM RATINGS Operating Temperature: -55 C to +150 C Storage Temperature: -55oC to +150oC SL03 thru SL24 have a Peak Pulse Power: 300 Watts (8/20 usec, Figure 1) Pulse Repetition Rate: <.01% o o G E H J DIMENSIONS INCHES MIN .110 .083 .047 .035 .070 .018 .0005 .035 .003 .015 MM MIN 2.80 2.10 1.20 .89 1.78 .45 .013 .89 .085 .37 Description This product provides unidirectional protection for 1 line by connecting the input/output line to pin 1, pin 2 to common or ground and pin 3 (is not connected). The SL03 thru SL24 product provides board level protection from static electricity and other induced-voltage surges that can damage sensitive circuitry. These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays protect 3.0/3.3 Volt components such as DRAM's, SRAM's, COMS, HCOMS, HSIC, and low volt. interfaces up to 24 volts. Because of the physical size, weight and protection capabilities, this product is ideal for use in but not limited to miniaturized electronic equipment such as hand held instruments, computers, computer peripherals and cell phones. DIM A B C D E F G H J K MAX .120 .098 .055 .041 .081 .024 .0039 .044 .007 .020 MAX 3.04 2.64 1.40 1.03 2.05 .60 .100 1.12 .180 .51 NOTE Suggested Solder Pad Layout .031 .800 .035 .900 .079 2.000 inches mm .037 .950 .037 .950 www.mccsemi.com SL03 thru SL24 MCC WAVE FORMS PPP - PEAK PULSE POWER 100 Ipp -- Peak Pulse Current -- % Ipp 100 Peak Value -- Ipp 8 X 20 Waveform 10 8/20 s 300 W pulse 50 Half-Value -- Ipp 2 1.0 0 0 t 10 td 20 30 .10 100ns 1s 10s 100s 1ms td - PULSE TIME - SEC 10ms t -- Time in microsec FIGURE 1 Peak Pulse Power Vs Pulse Time FIGURE 2 Pulse Wave Form MOUNTING PAD SOT23 CIRCUIT DIAGRAM ELECTRICAL CHARACTERISTICS @ 25 C Unless otherwise specified STAND OFF VOLTAGE VWM VOLTS BREAKDOWN VOLTAGE VBR @1 mA VOLTS MIN SL03 SL05 SL12 SL15 SL24 L03 L05 L12 L15 L24 3.3 5.0 12.0 15.0 24.0 4 6.0 13.3 16.7 26.7 CLAMPING VOLTAGE VC @ 1 Amp (FIGURE 2) VOLTS MAX 8 10.8 19 25 44 CLAMPING VOLTAGE VC @ 5 Amp (FIGURE 2) VOLTS MAX 11 13 26 32 57 LEAKAGE CURRENT ID @ VWM A MAX 200 100 1 1 1 CAPACITANCE @0V, 1 MHz C pF MAX 3 3 3 3 3 TEMPERATURE COEFFICIENT OF VBR aVBR mV/C MAX -5 3 10 13 30 PART NUMBER DEVICE MARKING NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off Voltage VWM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected. www.mccsemi.com |
Price & Availability of SL15
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |